App guide
PowderTracks is on Android.
What each PowderTracks setting does, where to find it, and how to get help. Most of it lives under Settings in the app; the rest is in Edit Session, the pencil on any ski day.
Sport: skiing, snowboarding or backcountry
You pick your sport the first time you open the app, and you can change it any time in Settings → Tracking. Each new day you record uses whatever sport is set when you press Start, so switch it before you head out.
- Skiing and Snowboarding track resort days: runs, lifts, and the resort detected automatically.
- Backcountry is for touring. It skips resort and lift detection and records your climbs as uphill.
Your gear (skis, board, the name you give them) is set per day: before you press Start, or later in Edit Session.
Season start month
PowderTracks groups your days into seasons like 2026/2027. The season start month, in Settings → Tracking, decides where one season ends and the next begins. It's October by default, so a day in November 2026 counts toward 2026/2027.
Skiing in the Southern Hemisphere, or starting your season late? Pick the month that fits. Changing it regroups the days you've already saved, too.
Session names
Every new day gets a name from a template you set in Settings → Tracking → Session name. The default is Day %session%: %resort%, which gives names like “Day 1: Arapahoe Basin”.
A template can use these six placeholders:
- %session%: the day number in the season (4)
- %resort%: the resort name (Crested Butte)
- %month_name%: the month's name (March)
- %month%: the month's number (3)
- %day%: the day of the month (7)
- %year%: the year (2026)
Anything else you type is kept as written, up to 60 characters. The screen also offers four ready-made templates: Day %session%: %resort%, %resort% %month%/%day%, %month_name% %day% %year% and %resort% – Day %session%. On a day with no resort (backcountry, or somewhere not on the map), %resort% is left out along with the punctuation next to it, so the default gives just “Day 4”.
Changing the template only affects days you record afterwards. Existing names stay as they are, and you can rename any day in Edit Session.
Drive Detection
Forget to stop tracking before the drive home? Drive Detection notices sustained highway speed and pauses tracking automatically, so the drive doesn't turn into your fastest “run” of the season. It's on by default, in Settings → Tracking → Drive Detection.
A banner and a notification tell you it paused. It doesn't start again by itself: tap Resume if you're back on the hill, or End if the day's done.
If a drive still ends up at the end of a day, PowderTracks asks before trimming it off when you save. It never cuts anything without asking.
Battery saver
Turn on Battery saver in Settings → Tracking to pause tracking automatically when your battery gets down to a level you choose: 5%, 10%, 15%, 20%, 25% or 30% (15% by default). It's off unless you switch it on, and handy when you need your phone to last the drive home. Tracking stays paused until you tap Resume.
Pocket mode
With Pocket mode on, PowderTracks ignores taps on the on-screen Pause, Resume and End buttons while your phone is in a pocket, so a stray brush through your jacket can't end your day. It uses the phone's proximity sensor, and only while you're recording. It's off by default, in Settings → Tracking.
- The Pause, Resume and End buttons in your notification shade, and on your watch, always work.
- If your phone has no proximity sensor, or the sensor misbehaves, taps simply work as normal. Pocket mode can never lock you into a session.
Motion data
Collect motion data for future terrain features (on by default, in Settings → Tracking) records small summaries of your phone's accelerometer, during runs only. Nothing is recorded on lifts or while you're standing around.
It's kept with your ski days on your phone, and goes along only in your cloud backup or a full-fidelity GPX export if you make one. It's groundwork for future features that tell groomers from bumps and powder. Today it isn't shown anywhere in the app. Switch it off if you'd rather not collect it.
Units & language
In Settings → Units & Language you can switch between Imperial (miles, feet, mph) and Metric (kilometres, metres, km/h), and choose the app's language. PowderTracks is available in:
- English
- Español (Spanish)
- Français (French)
- Italiano (Italian)
- Português (Portuguese)
- Norsk (Norwegian)
- Svenska (Swedish)
- 日本語 (Japanese)
- 中文 (Chinese)
- 한국어 (Korean)
Permissions
PowderTracks asks for a few Android permissions so it can track reliably with your phone in your pocket. You can see and fix all of them in Settings → Permissions, where each one shows green when it's set.
- Location: “All the time” and precise. Needed to keep recording while the screen is off. Android asks in two steps: first “While using the app”, then a trip to settings for “All the time”.
- Notifications. Shows the tracking notification, so you can see PowderTracks is recording and use its Pause, Resume and End buttons without opening the app.
- Battery: Unrestricted. Stops Android from slowing PowderTracks down to save power. Tap Allow, then App battery usage → Unrestricted.
- Health Connect (Premium). Lets PowderTracks read heart rate, calories and workouts from your watch's app. See Connect your watch.
Heart rate & calories
With Premium, a ski day can show your average and max heart rate and the calories you burned. They come from your watch's workout through Health Connect, or from the PowderTracks Wear OS app. When there's no calorie number from your watch, PowderTracks estimates one from your heart rate or your runs, using the weight, birth year and sex you enter in Settings → Health & Stats.
- Settings → Health & Stats has two separate switches, Show calories and Show heart rate, so you can hide either one everywhere. Your stored data is kept.
- For a single day, Edit Session lets you enter your own calorie number or hide calories, and hide heart rate (handy after a bad strap reading).
Setting up your watch the first time: Connect your watch.
Watch app
With Premium, a Wear OS watch can run the PowderTracks watch app: live stats on your wrist, Pause, Resume and End from the watch, and heart rate from the watch's own sensor. It's switched on in Settings → Backup & Sync → Wear OS. How to install it and what it shows: PowderTracks watch app.
Backup & Sync
On the free app, your history lives only on your phone. Export a GPX copy of your days now and then so a lost phone doesn't take your seasons with it.
Premium adds cloud backup in Settings → Backup & Sync: an encrypted copy of your days and ski-day photos (up to 1 GB, which is decades of skiing), and a one-tap restore on a new phone. Backup needs a free PowderTracks account (email and password). Tracking itself never needs one.
Strava and Wear OS watch stats are connected from the same screen.
Purchases & refunds
Premium is a one-time $19.99 purchase made inside the app through Google Play. There's no subscription and no checkout on this website. Tracking never needs an account; Premium uses a free PowderTracks account (email and password) so cloud backup, Strava and Friends work from day one.
- To unlock Premium, open Settings → PowderTracks Premium and tap Get Premium. Sign in, or create a free account with your email and a password, then Google Play takes the payment.
- On a new phone, install PowderTracks with the same Google account. If Premium doesn't come back on its own, open Settings → PowderTracks Premium, sign in to your PowderTracks account and restore your purchase there. Premium itself comes from Google Play, so it stays yours even if you sign out.
- Refunds are handled under Google Play's refund policy, because you buy through Google Play. See our Terms for details and how to request one.
Deleting a ski day
- Open the day.
- Tap the pencil to edit it.
- Tap the trash can at the top and confirm Delete.
Deleting is permanent: the day's runs, lifts, track, photos and health data are all removed from the app. A copy you uploaded to Strava stays on Strava.
If you'd rather keep a day but not count it (a theme-park day, a test), turn off Include in season totals in Edit Session instead. The day stays in your history with its own stats, but it's left out of your season stats, records, top runs and days, pass value and the friends leaderboard. Its “Day N” number and name don't change.
Sending feedback and GPS logs
Found a bug or have an idea? In Settings → About & Support:
- Send Feedback / Report Bug opens an email to us with your phone model, app version and settings filled in. Just add what happened.
- Share Diagnostic Report builds a zip of the app's GPS logs from the last two days, plus your device, permission and battery state. For a crash or a tracking problem, send it to support@powdertracks.com. The logs include your locations from those days, and they only leave your phone if you choose to share them.
Still stuck?
Email support@powdertracks.com. A real skier reads every message.